top of page

Publications

Books and books chapters

[7] O. Göl, G.A. Capolino, M. Poloujadoff, "An intuitive approach to the analysis of torque ripple in inverter driven induction motors," in Recent Developments of Electrical Drives, S. Wiak, M. Dems, K. Komeza Editors, Springer Verlag, ISBN 1-4020-4534-4, November 2006, pp.93-100.
[6] G.A. Capolino: Simulation of drive systems (chapter), Modern Electrical Drives; H.B. Ertan, A. Consoli, R. Collyer, Y. Üçtug Editors, Kluwer Academic, May 2000, pp.425-451.
[5] G.A. Capolino: Induction motor drives (chapter), Modern Electrical Drives; H.B. Ertan, A. Consoli, R. Collyer, Y. Üçtug Editors, Kluwer Academic, May 2000, pp.317-332.
[4] G.A. Capolino (contributor with 201 authors), CRC Comprehensive Dictionary of Electrical
Engineering, Editor Ph.Laplante, CRC Press, Boca Raton,1999, 702 pages.
[3] G.A. Capolino, J. Martinez-Velasco, N. Mohan, D. Van Dommelen, Simulation & CAD for electrical machines, power electronics and drives, ERASMUS Program Editor, 1991, 312 pages.
[2] G.A. Capolino, "Non-linear modelling and control of some classes of induction machines," New Trend in Nonlinear Control Theory; J. Descusse, M. Fliess, A. Isidori, D. Leborgne Editors, Springer-Verlag, 1989, pp.519-527.
[1] G.A. Capolino, M. Gautier, "Non-linear modelling and simulation of an induction generator," Applied modelling and simulation in technological systems, P. Borne & S.G. Tzafestas Editors, Elsevier Science, 1987, pp.419-425.

Journals and Magazines papers

[114] H. Hassani, R. Razavi-Far, M. Saif, G.-A. Capolino, “Regression Models With Graph-Regularization Learning Algorithms for Accurate Fault Location in Smart Grids,” IEEE Systems Journal, 2021, Vol. 15, N°2.

[113] G. Rezazadeh, F. Tahami, G.-A. Capolino, S. Vaschetto, Z. Nasiri-Gheidari, H. Henao, “Improvement of Concentrated Winding Layouts for Six-Phase Squirrel Cage Induction Motors,” IEEE Transactions on Energy Conversion, Year: 2020 | Volume: 35, Issue: 4.

[112] Y. Park, C. Yang, J. Kim, H. Kim, S.-B. Lee, K.N. Gyftakis, P. Panagiotou, S. Hedayati Kia, G.-A. Capolino, "Stray Flux Monitoring for Reliable Detection of Rotor Faults under the Influence of Rotor Axial Air Ducts," IEEE Transactions on Industrial Electronics, vol. 66, n°10, October 2019, pp. 7561-7570. IF=7.05

[111] R. Razavi Far, E. Hallaji, M. Farajzadeh-Zanjani, M. Saif, S. Hedayati Kia, H. Henao, G.-A. Capolino, "Information Fusion and Semi-Supervised Deep Learning Scheme for Diagnosing Gear Faults in Induction Machine Systems," IEEE Transactions on Industrial Eletronics, vol. 66, n° 8, August 2019, pp. 6331-6342. IF=7.05

[110] A. Pantea, A. Yazidi, F. Betin, S. Carriere, A. Sivert, B. Vacossin, H. Henao, G.A. Capolino, "Fault Tolerant Control of a Low Speed Six-Phase Induction Generator for Wind Turbines," IEEE Transactions on Industry Applications, vol. 55, n° 1, Jan./Feb. 2019, pp. 426-436. IF=2.743

[109] M. Hoseintabar Marzebali; J. Faiz; G.-A. Capolino; S. Hedayati Kia; H. Henao, "Gear Fault Detection Based on Stator Current and Mechanical Torque Signatures of Wound Rotor Induction Generator," IEEE Transactions on Energy Conversion, vol.33, n°3, September 2018, pp.1072-1085. IF=3.808

[108] G.-A. Capolino, "Professor Gerard-Andre Capolino Delivered Distinguished Lectures at the University of Texas at Dallas," IEEE Industrial Electronics Magazine, vol. 11, n°4, Dec. 2017, pp. 41-42. IF=10.71

[107] G.-A. Capolino, "Professor Gerard-Andre Capolino Delivered a Distinguished Lecture at the Democritus University of Thrace, Xanthi, Greece," IEEE Industrial Electronics Magazine, vol. 11, n°4, Dec. 2017, pp. 39-40. IF=10.71

[106] G.-A. Capolino, "IES Senior Past-President, Dr. Gerard-Andre Capolino, Recognized by the PES Cyril G. Veinott Electromechanical Energy Conversion Award," IEEE Industrial Electronics Magazine, vol. 11, n°4, Dec. 2017, pp. 38-39. IF=10.71

[105] M. Taherzadeh, S. Carriere, F. Betin, M. Joorabian, R. Kianinezhad, G.A. Capolino, "On-line switched control of a six-phase induction generator in faulted mode," International Journal of Electrical Power and Energy Systems, vol. 88, June 2017, Pages 75–86. IF=2.587

[104] Y. Gritli, C. Rossi, D. Casadei, F. Filipetti, G.A. Capolino, "A Diagnostic Space Vector-Based Index for Rotor Electrical Fault Detection in Wound-Rotor Induction Machines Under Speed Transient," IEEE Transactions on Industrial Electronics, vol. 64, n°5, May 2017, pp. 3892-3902. IF=6.498

[103] A. Boglietti, G.A. Capolino, B. Kawkabani, L. Zarri, "ICEM2016: another very successful conference," IEEE Industrial Electronics Magazine, vol. 10, n°4, Dec. 2016, pp. 76 and 84. IF=5.303

[102] G.A. Capolino, "Prof. Gérard-André Capolino delivered distinguished lectures in Montreal," IEEE Industrial Electronics Magazine, vol. 10, n°4, Dec. 2016, pp. 70-71. IF=5.303

[101] S. Hedayati Kia, H. Henao, G.A. Capolino, "Fault Index Statistical Study for Gear Fault Detection Using Stator Current Space Vector Analysis," IEEE Transactions on Industry Applications, vol. 52, n°6, Nov.-Dec. 2016, pp.4781-4788. IF=1.756

[100] M. Hoseintabar Marzebali, S. Hedayati Kia, H. Henao, G.A. Capolino, J. Faiz, "Planetary Gearbox Torsional Vibration Effects on Wound Rotor Induction Generator Electrical Signatures," IEEE Transactions on Industry Applications, vol. 52, n°6, Nov.-Dec. 2016, pp.1470-1480. IF=1.756

[99] F. Betin, A. Yazidi, A. Sivert, G.A. Capolino, "Fuzzy Logic Control Design for Electrical Machines," International Journal of Electrical Engineering and Technology (IJEET), vol. 7, n°3, June 2016, pp. 14-24.

[98] M. Taherzadeh, S. Carriere, F. Betin, M. Joorabian, R. Kianinezhad, G.A. Capolino, "A Novel Strategy for Sensorless Control Modification of a Six-phase Induction Generator in Faulted Mode," Electric Power Components and Systems, vol.44, n°8, April 2016, pp.941-953. IF=0.62

[97] H.Y. Kim, S.B. Lee, S.B. Park, S. Hedayati Kia, G.A. Capolino, "Reliable Detection of Rotor Faults Under the Influence of Low Frequency Load Torque Oscillations for Applications with Speed Reduction Couplings," IEEE Transactions on Industry Applications, vol. 52, n°2, March-April 2016, pp.1460-1468. IF=1.756

[96] A. Pantea, A. Yazidi, F. Betin, M. Taherzadeh, S. Carriere, H. Henao, G.A. Capolino, "Six-Phase Induction Machine Model for Electrical Fault Simulation Using the Circuit-Oriented Method," IEEE Transactions on Industrial Electronics, vol. 63, n°1, Special Section on Multiphase Electrical Machines and Drives - Revisited, January 2016, pp. 494-503. IF=6.498

[95] G.A. Capolino, F. Tahami, "TPES 2015 held in Tehran, Iran," IEEE Industrial Electronics Magazine, vol.9, n°2, June 2015, pp. 59-60. IF=4.031

[94] S. Hedayati Kia, H. Henao, G.A. Capolino, "Torsional Vibration Assessment Using Induction Machine Electromagnetic Torque Estimation," IEEE Transactions on Industrial Electronics, vol. 62, n°3, Special Section on Advances in Electrical Machines, March 2015, pp. 1866-1878. IF=6.498

[93] M. Riera-Guasp, J.A. Antonino-Daviu, G.A. Capolino, "Advances in electrical machine, power electronic and drive condition monitoring and fault detection: state of the art," IEEE Transactions on Industrial Electronics, vol. 62, n°3, Special Section on Advances in Electrical Machines, March 2015, pp. 1746-1759. IF=6.498

[92] G.A. Capolino, J.A. Antonino-Daviu, M. Riera-Guasp, "Modern Diagnostics Techniques for Electrical Machines, Power Electronics, and Drives - Guest Editorial," IEEE Transactions on Industrial Electronics, vol. 62, n°3, Special Section on Advances in Electrical Machines, March 2015, pp. 1738-1745. IF=6.498

[91] B. Fahimi, G.A. Capolino, "IECON’2014 in Texas," IEEE Industrial Electronics Magazine, vol.9, n°1, March 2015, pp. 88-89. IF=4.031

[90] H. Henao, G.A. Capolino, M. Fernandez-Cabanas, F. Filippetti, C. Bruzzese, E. Strangas, J. Estima, M. Riera-Guasp, S. Hedayati Kia, "Future trends in fault diagnosis for electrical machines: a review of diagnostics techniques," IEEE Industrial Electronics Magazine, vol.8, n°2, June 2014, pp. 3-5. IF=5.061

[89] F. Betin, G.A. Capolino, D. Casadei, B. Kawkabani, R. Bojoi, L. Harnefors, E. Levi, L. Parsa, B. Fahimi "Trends in electrical machines control: samples for classical, sensorless and fault-tolerant techniques," IEEE Industrial Electronics Magazine, vol.8, n°2, June 2014, pp. 3-5. IF=5.061

[88] G.A. Capolino, A. Cavagnino, "New Trends in Electrical Machines Technology – Part II," IEEE Transactions on Industrial Electronics, vol. 61, n°9, Special Section on Electrical Machines Technology, September 2014, pp.4931-4936. IF=5.16

[87] G.A. Capolino, A. Cavagnino, "New Trends in Electrical Machines Technology – Part I," IEEE Transactions on Industrial Electronics, vol. 61, n°8, Special Section on Electrical Machines Technology, August 2014, pp.4281-4285. IF=5.16

[86] G.A. Capolino, " Message from the President: A Thought on Volunteering Activities," IEEE Industrial Electronics Magazine, vol.7, n°4, December 2013, pp. 3-5. IF=3.16

[85] G.A. Capolino, "Message from the President: Some success stories of the last two years," IEEE Industrial Electronics Magazine, vol.7, n°3, September 2013, pp. 4-5. IF=3.16

[84] S. Toma, L. Capocchi, G.A. Capolino, "Wound Rotor Induction Generator Inter-Turn Short- Circuits Diagnosis Using a New Digital Neural Network," IEEE Transactions on Industrial Electronics, vol. 60, n°9, Special Section on Diagnostics of EMPED, September 2013, pp.4043-4052. IF=5.16

[83] Y. Gritli, L. Zarri, C. Rossi, F. Filippetti, G.A. Capolino, D. Casadei, "Advanced Diagnosis of Electrical Faults in Wound Rotor Induction Machines," IEEE Transactions on Industrial Electronics, vol. 60, n°9, Special Section on Diagnostics of EMPED, September 2013, pp.4012-4014. IF=5.16

[82] G.A. Capolino, F. Filippetti, "Guest Editorial on Diagnostics of Electrical Machines, Power Electronics and Drives – Part II," IEEE Transactions on Industrial Electronics, vol. 60, n°8, Special Section on Diagnostics on EMPED, September 2013, pp.4009-4011. IF=5.16

[81] G.A. Capolino, F. Filippetti, "Guest Editorial on Diagnostics of   Electrical Machines,  Power Electronics and Drives – Part I," IEEE Transactions on Industrial Electronics, vol. 60, n°7, Special Section on Diagnostics on EMPED, August 2013, pp.3396-3397. IF=5.16

[80] G.A. Capolino, " Message from the President: Building an IES community worldwide," IEEE Industrial Electronics Magazine, vol.7, n°2, June 2013, pp. 58-59. IF=3.16

[79] G.A. Capolino, " Message from the President: A vision of industrial electronics," IEEE Industrial Electronics Magazine, vol. 7, n°1, March 2013, pp. 3-4. IF=3.16

[78] G.A. Capolino, "In Memoriam: Alfio Consoli, University of Catania, Italy," IEEE Industrial

Electronics Magazine, vol. 6, n°4, December 2012, pp. 65. IF=5.00

[77] G.A. Capolino, "Distinguished Lecture by Dr. Gerard-Andre Capolino in Singapore," IEEE Industrial Electronics Magazine, vol. 6, n°4, December 2012, pp. 65-66. IF=5.00

[76] G.A. Capolino, "Message from the President: IES - Among the top of all IEEE Societies," IEEE Industrial Electronics Magazine, vol. 6, n°4, December 2012, pp. 3-4. IF=5.00

[75] L. Saidi, F. Fnaiech, H. Henao, G.A. Capolino, G. Cirrincione, "Diagnosis of broken-bars fault in induction machines using higher order spectral analysis," ISA Transactions, Elsevier, September 21, 2012, 9 pages (on line: http://dx.doi.org/10.1016/j.isatra.2012.08.003). IF=1.109

[74] G.A. Capolino, "Message from the President:  IES and its numerous conferences serving members," IEEE Industrial Electronics Magazine, vol. 6, n°3, September 2012, pp.3 and 55. IF=5.00

[73] G.A. Capolino, "Message from the President: IES and the sister Societies," IEEE Industrial Electronics Magazine, vol. 6, n°2, June 2012, pp. 3 and 58. IF=5.00

[72] F. Betin, G.A. Capolino, "Shaft Positioning for Six-Phase Induction Machines with Open Phases Using Variable Structure Control," IEEE Transactions on Industrial Electronics, vol. 59, n°6, Special Section on Future Trends in Electrical Machines Technology, June 2012, pp. 2612-2620. IF=5.16

[71] G.A. Capolino, A. Boglietti, "Guest Editorial on Future Trends in Electrical Machines Technology – Part II," IEEE Transactions on Industrial Electronics, vol. 59, n°6, Special Section on Future Trends in Electrical Machines Technology, June 2012, pp. 2390-2392. IF=5.16

[70] G.A. Capolino, A. Boglietti, "Guest Editorial on Future Trends in Electrical Machines Technology – Part I," IEEE Transactions on Industrial Electronics, vol. 59, n°5, Special Section on Future Trends in Electrical Machines Technology, May 2012, pp. 2038-2040. IF=5.16

[69] G.A. Capolino, J.J. Rodriguez-Andina, "An Interview with Prof. Gérard-André Capolino, 2012-

2013 IES President," IEEE Industrial Electronics Magazine, vol. 6, n°1, March 2012, pp. 48-53. IF=5.00

[68] G.A. Capolino, "Message from the President: IES – An International Family," IEEE Industrial Electronics Magazine, vol. 6, n°1, March 2012, pp. 3 and 43. IF=5.00

[67] A. Yazidi, H. Henao, G.A. Capolino, F. Betin, F. Filippetti, "A Web-Based Remote Laboratory for Monitoring and Diagnosis of AC Electrical Machines," IEEE Transactions on Industrial Electronics, vol. 58, n°10, October 2011, pp. 4950-4959. IF=5.16

[66] H. Henao, M.J. Rastegar, G.A. Capolino, S. Sieg-Zeba, "Wire Rope Fault Detection in a Hoisting Winch System by Motor Torque and Current Signature Analysis," IEEE Transactions on Industrial Electronics, vol. 58, n°5, Special Section on Diagnostics of EMPED, May 2011, pp. 1727-1736. IF=5.16

[65] H. Henao, S. Hedayati Kia, G.A. Capolino, "Torsional Vibration Assessment and Gear Fault Diagnosis in Railway Traction System," IEEE Transactions on Industrial Electronics, vol. 58, n°5, Special Section on Diagnostics of EMPED, May 2011, pp. 1707-1717. IF=5.16

[64] G.A. Capolino, H. Hénao, "Guest Editorial on Diagnostics of  Electrical Machines,  Power Electronics and Drives," IEEE Transactions on Industrial Electronics, vol. 58, n°5, Special Section on Diagnostics of EMPED, May 2011, pp. 1463-1467. IF=5.16

[63] M.A. Fnaiech, F. Betin, B. Nahidmobarakeh, G.A. Capolino, F. Fnaiech, "Fuzzy Logic and Sliding Mode Controls Applied to Six Phase Induction Machine with Open Phases," IEEE Transactions on Industrial Electronics, vol. 57, n°1, Special Section on Advances in Electrical Machines, January 2010, pp. 354-364. IF=4.678

[62] S. Hedayati Kia, H. Henao, G.A. Capolino, "Torsional Vibration Assessment Using Induction Machine Electromagnetic Torque Estimation," IEEE Transactions on Industrial Electronics, vol. 57, n°1, Special Section on Advances in Electrical Machines, January 2010, pp. 209-219. IF=4.678

[61] G.A. Capolino, A. Boglietti, "Guest Editorial on Advances in Electrical Machines," IEEE Transactions on Industrial Electronics, vol. 57, n°1, Special Section on Advances in Electrical Machines, January 2010, pp. 3-5. IF=4.678

[60] S. Hedayati Kia, H. Henao, G.A. Capolino, "Torsional Vibration Effects on Induction Machine Current and Torque Signatures in Gearbox-Based Electromechanical System," IEEE Transactions on Industrial Electronics, vol. 56, n°11, November 2009, pp. 4689-4699. IF=5.468

[59] R. Alcharea, R. Kiani-Nezhad, B. Nahidmobarakeh, F. Betin, G.A. Capolino, "A New Direct Torque Control for Six-Phase Induction Motors with Single Neutral," Electric Engineering Research Report, n°2, September 2009, 9 pages (www.eerr.unina.it).

[58] S. Hedayati Kia, H. Henao, G.A. Capolino, "Analytical and Experimental Study of Gearbox Mechanical Effect on the Induction Machine Stator Current Signature," IEEE Transactions on Industry Applications, vol. 45, n° 4, July/August 2009, pp. 1405-1415. IF=2.058

[57] S. Hedayati Kia, H. Henao, G.A. Capolino, "Diagnosis of Broken Bar Fault in Induction Machines  Using Discrete Wavelet Transform without Slip Estimation," IEEE Transactions on Industry Applications, vol. 45, n°4, July/August 2009, pp.1395-1404. IF=2.058

[56] R. Kiani-Nezhad, B. Nahidmobarakeh, F. Betin, G.A. Capolino, "Robust Sensorless Vector Control of Induction Machines," Iranian Journal of Science & Technology, Transactions B, Engineering, Vol. 33, n° B2, April 2009, pp. 133-147. IF=0.265

[55] B.  Fahimi, G.A.  Capolino, "The IES Electrical Machines Technical Committee Gains Momentum," IEEE Industrial Electronics Magazine, vol. 2, n° 4, December 2008, pp. 38-39.

[54] A. Bellini, A. Yazidi, C. Rossi, F. Filippetti, D. Casadei, G.A. Capolino, "High Frequency Resolution Techniques for Rotor Fault Detection of Induction Machines," IEEE Transactions on Industrial Electronics, vol.55, n°12, December 2008, pp. 4200-4209. IF=5.468

[53] A. Bellini, F. Filippetti, C. Tassoni, G.A. Capolino, "Advances in Diagnostic Techniques for Induction Machines," IEEE Transactions on Industrial Electronics, vol.55, n°12, Invited paper, December 2008,  pp. 4109-4126. IF=5.468

[52] A. Stefani, A. Yazidi, C. Rossi, F. Filippetti, D. Casadei, G.A. Capolino, "Doubly-Fed Induction Machines Diagnosis Based on Signature Analysis of Rotor Modulating Signals," IEEE Transactions on Industry Applications, vol.44, n°6, Nov./Dec. 2008, pp. 1711-1721. IF=2.058

[51] G. Aroquiadassou, A. Cavagnino, H. Henao, A. Boglietti, G.A. Capolino, "A Simple Circuit- Oriented Model for Predicting Six-Phase Induction Machine Performances," Electric Power Systems Research, vol.78, n°10, October 2008, pp. 1798-1805. IF=0.952

[50] K. Bacha, H. Henao, M. Gossa, G.A. Capolino, "Induction machine fault detection using stray flux EMF measurement and neural network-based decision," Electric Power Systems Research, vol.78, n°7, July 2008, pp. 1247-1255. IF=0.952

[49] R. Kiani-Nezhad, B. Nahidmobarakeh, L. Baghli, F. Betin, G.A. Capolino, "Modeling and control of six-phase symmetrical induction machines under fault condition due to open phases," IEEE Transactions on Industrial Electronics, vol. 55, n°5, Special Section on Multi-phase Machines & Drives, May 2008, pp.1966-1977. IF=5.468

[48] S. Hedayati Kia, H. Henao, G.A. Capolino, "A high resolution frequency estimation method for three-phase induction machine fault detection," IEEE Transactions on Industrial Electronics, vol. 54, n°4, August 2007, pp. 2305-2314. IF=2.216

[47] M.A. Fnaiech, F. Betin, F. Fnaiech, B. Nahidmobarakeh, G.A. Capolino, "A DSP-based implementation of a non-linear predictive control for induction machines," Electromotion, vol.14, n°3, July-September 2007, pp.133-142.

[46] F. Betin, G.A. Capolino, "Sliding mode control for an induction machine submitted to large variations of mechanical configuration," Int. J. Adapt. Control & Signal Processing, vol. 21, June 2007, pp. 745-763. IF=0.776

[45] H. Rehaoulia, H. Henao, G.A. Capolino, "Modeling of synchronous machines with magnetic saturation," Electric Power Systems Research, vol.77, n°5-6, April 2007, pp.652-659. IF=0.446

[44] F. Betin, A. Sivert, A. Yazidi, G.A. Capolino, "Determination of scaling factors for fuzzy logic control using sliding mode approach: application to control of a DC machine drive," IEEE Transactions on Industrial Electronics, vol.54, n°1, February 2007, pp.296-309. IF=2.216

[43] M. Cirrincione, M. Pucci, G. Cirrincione, G.A. Capolino, "Sensorless control of induction motors by reduced order observer with MCA EXIN + based adaptive speed estimation," IEEE Transactions on Industrial Electronics, vol.54, n°1, February 2007, pp.150-166. IF=2.216

[42] M. Cirrincione, M. Pucci, G. Cirrincione, G.A. Capolino, "Sensorless control of induction machines by a new neural algorithm: the TLS EXIN neuron," IEEE Transactions on Industrial Electronics, vol.54, n°1, February 2007, pp.127-149. IF=2.216

[41] G.A. Capolino, L. Garcia-Franquelo, R. Grisel, J.Y. Hung, "IECON’2006 in Paris: a memorable event!,"  IEEE Industrial Electronics Newsletter, vol. 53, n° 4, December 2006, pp. 6-9.

[40] H. Rehaoulia, H. Henao, G.A. Capolino, "A method to develop various models for induction machines with main flux saturation," Electromotion, vol.13, n°3, July-September 2006, pp.83-92.

[39] F. Betin, A. Sivert, B. Nahid, G.A. Capolino, "Position control of an induction machine using variable structure control," IEEE/ASME Transactions on Mechatronics, vol.11, n°3, June 2006, pp.358-361. IF=0.979

[38] M. Cirrincione, M. Pucci, G. Cirrincione, G.A. Capolino, "An adaptive speed observer based on a new total least-squares neuron for induction machine drives," IEEE Transactions on Industry Applications, vol.42 , n°1, January-February 2006, pp.89-104. IF=0.611

[37] M. Cirrincione, M. Pucci, G. Cirrincione, G.A. Capolino, "A MRAS sensorless technique based on MCA EXIN + Neuron for high performance induction motor drives," Automatika, vol.46, n°1-2, 2005, pp.59-72.

[36] M. Cirrincione, M. Pucci, G. Cirrincione, G.A. Capolino, "Constrained minimization for parameter estimation of induction motors in saturated and unsaturated conditions," IEEE Transactions on Industrial Electronics, vol.52, n°5, October 2005, pp.1391-1402. IF=0.536

[35] H.B. Ertan, B. Dag, G.A. Capolino, "Calculation of parameters of single-phase PM motor for design optimization," IEEE Transactions on Energy Conversion, vol.20, n°3, September 2005, pp.538-548. IF=0.745

[34] T. Assaf, H. Henao, G.A. Capolino, "A spectral method for on-line computation of the harmonics of symmetrical components in induction machines," European Transactions on Electrical Power, vol.15, n°3, May-June 2005, pp.203-216. IF=0.056

[33] H. Henao, H. Razik, G.A. Capolino, "Analytical approach of the stator current frequency harmonics  computation for detection of induction machine rotor faults," IEEE Transactions on Industry Applications, vol. 41, n°3, May-June 2005, pp.801-807. IF=0.959

[32] E. Bouteleux, L. Morel, H. Yahoui, H. Henao, C. Delmotte, G.A. Capolino, G. Rostaing, J.P. Rognon, E. Foulon, L. Loron, G. Didier, H. Razik, G. Houdouin, G. Barakat, B. Dakyo, S. Tnani, G. Champenois, J.C. Trigeassou, V. Devanneaux, B. Dagues, J. Faucher, "Modélisation et diagnostic de la machine asynchrone à cage en présence de défauts," Revue Internationale du Génie Electrique, Article invité, vol.8, n°2, mai 2005, pp.287-330.

[31] M. Cirrincione, M. Pucci, G. Cirrincione, G.A. Capolino, "On the application of TLS techniques to AC electrical drives," Journal of Electrical Systems, ISSN 1112-5209, vol.1, n°1, January 2005, Invited paper, pp.1-12.

[30] K. Bacha, M. Gossa, G.A. Capolino, "Detection and fault diagnosis in electrical drives: a time- frequency approach," Electromotion, vol.11, n°4, October-December 2004, pp.185-193.

[29] C. Demian, A. Mpanda, H. Henao, G.A. Capolino, "Detection of induction machines rotor faults at standstill using signal injection," IEEE Transactions on Industry Applications, vol.40, n°6, Nov.- Dec. 2004, pp.1550-1559. IF=0.987

[28] M. Cirrincione, M. Pucci, G. Cirrincione, G.A. Capolino, "A new TLS-based MRAS speed estimation with adaptive integration for high-performance induction machine drives," IEEE Transactions on Industry Applications, vol.40, n°4, July-Aug. 2004, pp.1116-1137 (revised version of Proceedings [114]). IF=0.987

[27] G.A. Capolino, F.A. FurfariÂ…, "André Blondel (1863-1938): French scientist and engineer," IEEE Industry Applications Magazine, vol.10, n°3, May-June 2004, Invited paper, pp.12-15. IF=0.391

[26] H. Henao, C. Martis, G.A. Capolino, "An equivalent internal circuit model of the induction machine for advanced spectral analysis," IEEE Transactions on Industry Applications, vol.40, n°3, May-June 2004, pp.726-734 (revised version of Proceedings [105]). IF=0.987

[25] F. Betin, A. Sivert, A. Faqir, G.A. Capolino, "Position control of an induction machine using fuzzy-logic regulator," Electromotion, vol.11, n°2, April-June 2004, pp.56-66.

[24] N. Bonnail, D. Tonneau, F. Jandard, G.A. Capolino, H. Dallaporta, "Variable structure control of a piezoelectric actuator for a scanning tunneling microscope," IEEE Transactions on Industrial Electronics,  vol. 51, n° 2, April 2004, pp.354-363. IF=0.976

[23] M. Cirrincione, M. Pucci, G. Cirrincione, G.A. Capolino, "A new adaptive integration methodology for estimating flux in induction machine drives," IEEE Transactions on Power Electronics, vol.19, n°1, January 2004, pp.25-34. IF=1.202

[22] C. Martis, H. Henao, G.A. Capolino, "Inter-turn short-circuits in induction machine and their influence on the electromagnetic torque," Electromotion, vol.10, n°4, July-September 2003, pp.702-707 (cf. Proceedings [119]).

[21] B. Nahidmobarakeh, F. Betin, D. Pinchon, G.A. Capolino, "Sensorless field-oriented control of induction machines using a reduced-order linear disturbance observer," Electromotion, vol.10, n°4, July-September 2003, pp.545-550 (cf. Proceedings [118]).

[20] F. Betin, A. Faqir, D. Pinchon, G.A. Capolino, "Position control of an induction machine using fuzzy-logic theory," Electromotion, vol.10, n°4, July-September 2003, pp.455-460 (cf. Proceedings [117]).

[19] M. Cirrincione, M. Pucci, G. Cirrincione, G.A. Capolino, "Least-squares techniques for the parameter estimation of induction motors," Electromotion, vol.10, n°4, July-September 2003, pp.437-443 (cf. Proceedings [116]).

[18] M. Cirrincione, M. Pucci, G. Cirrincione, G.A. Capolino, "Constrained least-squares method for the estimation of the electrical parameters of an induction motor," COMPEL: Int. J. for Computation and Maths. in Electrical and Electronic Eng., vol.22, n°4, October 2003, pp.1089-1101 (revised version of Proceedings [99]). IF=0.336

[17] C. Delmotte-Delforge, H. Henao, G. Ekwe, P. Brochet, G.A. Capolino, "Comparison of two modeling methods for induction machine study: application to diagnosis," COMPEL: Int. J. for Computation and Maths. in Electrical and Electronic Eng., vol.22, n°4, October 2003, pp.891-908 (revised version of Proceedings [98]). IF=0.336

[16] H. Henao, C. Demian, G.A. Capolino, "A frequency-domain detection of stator winding faults in induction machines using an external flux sensor," IEEE Transactions on Industry Applications, vol.39, n°5 , Sept.-Oct. 2003, pp.1272-1279 (revised version of Proceedings [104]). IF=0.783

[15] M. Cirrincione, M. Pucci, G. Cirrincione, G.A. Capolino, "A new experimental application of least-squares techniques for the estimation of the induction motor parameters," IEEE Transactions on Industry Applications, vol.39, n°5 , Sept.-Oct. 2003, pp.1247-1256 (revised version of Proceedings [103]). IF=0.783

[14] A. Sivert, A. Faqir, F. Betin, D. Pinchon, G.A. Capolino, "A new variable structure control algorithm for DC motor drives," Electromotion, vol.9, n°3, July-September 2002, pp.135-146.

[13] F. Betin, D. Pinchon, G.A. Capolino, "A time-varying sliding surface for robust position control of a DC motor drive," IEEE Transactions on Industrial Electronics, vol.49, n°2, April 2002, pp.462-473. IF=0.560

[12] M.G. Melero, M.F. Cabanas, G.A. Orcajo, J.M. Cano, G.A. Capolino, "Système pour la détection de défauts d'isolement dans les moteurs à induction," Revue Internationale de Génie Electrique, vol.5, n°1, 2002, pp.49-62.

[11] F. Betin, D. Pinchon, G.A. Capolino, "Control of electrical drives subject to large variations of load: a fuzzy-logic approach," Electromotion, vol.8, n°3, July-September 2001, pp.155-168.

[10] F. Betin, D. Pinchon, G.A. Capolino, "Fuzzy logic applied to speed control of a stepping motor drive," IEEE Transactions on Industrial Electronics, vol.47, n°3, June 2000, pp.610-622.

[9] H. Hénao, G.A. Capolino, E. Bassily, M. Poloujadoff, "Current control algorithms for switched reluctance machine servo drive," Electric Machines & Power Systems, vol.26, n°10, 1998, December 1998, pp.1019-1033.

[8] S. Bouchiker, G.A. Capolino, M. Poloujadoff, "Vector control of a permanent-magnet synchronous motor using AC-AC matrix converter," IEEE Transactions on Power Electronics, vol.13, n°6, November 1998, pp.1089-1099.

[7] H. Hénao, G.A. Capolino, J.A. Martinez-Velasco, "An approach of CAD for electrical drives using EMTP," Electromotion, vol.4, n°3, 1997, pp.91-100.

[6] M.E.H. Benbouzid, G.A. Capolino, "A project-oriented power engineering laboratory," IEEE Power Engineering Review, November 1996, pp.42-43 and IEEE Transactions on Power Systems, November 1996, pp.1163-1169.

[5] R. Beguenane, M.E.H. Benbouzid, G.A. Capolino, "On-line identification of induction motor rotor parameters from terminal signals," Electromotion, vol.3, n°1, April-June 1996, pp.51-57.

[4] M. Boussak, G.A. Capolino, "Recursive least-squares rotor time-constant identification for vector-controlled induction machine," Electric Machines and Power Systems, vol.20, n°2, 1992, pp.137-147.

[3] G.A. Capolino, "DC machine models from UM to block-scheme representation," EMTP News, vol.4, n°4, December 1991, pp.4-13.

[2] G.A. Capolino, O. Hasnaoui, "Simulation des performances d'un convertisseur DC-AC monophasé comportant un contrôleur à hystéresis," Modelling, simulation & control, vol.10, Part-A, 1987, pp.1-16.

[1] G.A. Capolino, "Simulation of transient behaviour of capacitor-run induction motor controlled with static converters," IMACS Modelling & Simulation TC1, J. Robert Editor, Elsevier Science, 1984, pp. 97-104.

bottom of page